Ram asked:


If anyone has experienced this or heard of this I would greatly appreciate your help. I have checked all of the vacuum lines to the brake booster and I have also checked inside the vehicle everything surrounding the brake pedal. I have brought the vehicle to the Dodge dealer and they can not seem to find the high pitch whistle. When it first began it would only whistle when you applied the brakes, now it is constant and very irritating (Please Help). I am an ex auto mechanic and I can’t figure it out, the only thing I can think of is to replace the brake booster but this is very costly and I want to make sure that this is the actual problem.

Thank you.

Jon B asked:


I have a 1994 Dodge 1500 that runs fine, however when at highway speeds, if I hit a rough patch of road, it picks up a very bad vibration. It feels like a tire going down. However all of the tires are fine, and if I pull over, it goes away. It runs fine at speed if the road is smooth, but on rough highway, this problem shows up. I’m sure its in the suspention, but don’t know if its most likly a spring or shock or something else. Any info would help.

Derek asked:


Rangel is pushing and Obama said he wants a draft.

Just in case, how would i dodge the draft, without leaving the county or by going to jail? I am not a murderer and I will help my freinds dodge it too, thanks.

kurty6969 asked:

Lambourgini orange. the interior is now painted . i need to update my video and do a burn out lol wahooo

riojas4 asked:


Alright I got a 93 dodge daytona and i’m looking to find a good system for it. But their is so many different brands its hard to tell what to get. I listen to rap and other types of music. I also want to keep it cheap any suggestions they will be greatly appreciated.

bargest asked:

EST

shmulfer asked:


I have a 1992 Stealth RT /TT that is in mint shape with only 50,000 miles. I have a couple of problems that I (or the dodge dealer) can’t diagnose. When I give it’s gas in first gear and let it off and push in the clutch, it makes a clunk sound and it seems to lose a bit of forward momentum, to the point of feeling somewhat pushed forward in your seat. It feels like a broken motor mount, but the mounts are fine. The driveshaft U joints are tight and it has a new transfer case (when changed, Dogde dealer said the splines were in good shape. The second problem is the stearing. It doesn’t want to stay on center, the slightest bump will cause it to pull to the right or left and when I turn the opposite way ,it will go past center and pull the other way. I just had a four wheel alignment done at Dodge and all suspention parts are tight and in good shape. It’s an allwheel drive, allwheel stearing and electronic controlled suspension vehicle. Any help is greatly appreciated.
Shortmam: I know there is alot of things that can go wrong with these cars ,but if they drove like mine (and many others with the same problems) they wouldn’t have sold any. Yet they sold quite a few because they handle like a dream. I have driven other stealths without the problems of mine.
Thank for your input J. This is why I won’t take my stealth to a shop. They don’t have a clue, Dodge included. If I can’t figure it out ,I think I will take it to Mitsubishi.

Veracifier asked:

Mike Mukasey Attorney General Senate Confirmation Hearing, Day 2. October 18, 2007 … Attorney General Senate confirmation hearing Mike Mukasey NextNewNetworks

Dion J asked:


I have a1998 Dodge Stratus with a check engine light. I don’t quite know what the trouble code is because I haven’t gotten it check out yet. The car is okay in park but when i put it in drive or reverse the engine starts running rough and misfiring and the steering wheel shakes violently. Is this one of the symptoms of a bad O2 sensor or Spark Plug Problems?

ruckin08 asked:


I would like to take my automatic 1976 Dodge Dart Sport and move the shifter from the column to the floor. Is there a linkage I will need to do this? Do I need to buy a standard transmission floor pan to install it, or do I just need to cut a hole in the existing floor pan for the shifter install?